Conflix Polystone 28mm Buildings
Last update 30th December 2004
Here's a lisitng of the small range of 'fantasy' buildings made by Conflix.
They are distributed by PocketBond Ltd, PO Box 80, Welwyn, AL6 0ND, England.
Items are made in China of hollow cast 'polystone' and are hand painted. Detail
is crisp and clear.I've listed them as they are not well shown online at this
point. They also make a range of 20mm WW2 ruined structures and bunkers which
also look quite good. Dimesions as quoted are for floor plan area (wall to wall)
and height to ridge line. They were available very briefly in Australia via
Milsims who are out of stock with a possible resupply in June/July.
- EM6801 Merchant's House - Simple stepped two story
house, with upper floor overhanging lower floor at the front. Door to front
and rear, with some windows. No windows to gable ends. Size - 140mm wide x
75mm deep x 135mm high. Lower floor is set back by 13mm at front. Height from
ground to 1st floor 38mm.
- EM6802 Guild Master's house - Complex 2 story structure.
2 doors to front, one to rear. Size - 150mm wide x 98mm deep x 125mm high.Front
upper floor overhangs lower storey by 13mm. Hieght from ground to 1st floor
38mm.
- EM6803 House with hayloft - Simple box shape with
one door. One window to each side, none to rear. Size - 85mm wide x 90mm deep
x 136mm high.
- EM6804 Tavern - Looking way more like a simple
house to me, and quite small for a tavern. Size - 90mm wide x 92mm deep x
91mm high. One door to front, one window to left wall.
- EM6805 Tavern Extension - a small attachment I guess 90mm wide x 50mm deep
x 70mm high with one set of double doors to front.
- EM6806 Coach House/Stables - A simple rectangular
structure almost the right size for a cottage, but with a double door entry,
and a gable window to the left wall. Size - 133mm wide x 85mm deep x 92mm
high.
- EM6807 Blacksmith's Forge - A two part structure,
a roof structure with 2 walls, and a forge pit. The forge pit comes with precast
floor and fits roughly under the roof structure. Purists will need to do a
little filling. The chimney vent is cast open. Floorplan size 86mm wide x
77mm deep by 72mm high.